Brand

CAMBRO

1-Year Warranty

209 products from CAMBRO · 17 in Polycarbonate Inserts

Warranty termsDefault 5-year warranty. Specific product lines have different terms (see per-model overrides).
Healthcare

Cambro meal distribution for hospitals, aged-care and correctional kitchens.

Cambro is the global standard for insulated meal distribution in healthcare. From patient tray-line to ward delivery, the StoreSafe, Camtherm, Camcarrier and Heatwave pellet systems hold hot food above +65 °C and cold food below +5 °C across long delivery runs — without electricity, without active heating, and without the temperature-abuse window that puts patients at risk.

Tray line

Camtherm® retherm carts

Powered retherm cabinets that bring cold-plated trays back to safe serving temperature on the ward — no kitchen reheat, no holding gap.

Transport

Camcarrier® insulated carriers

Top-loaders and front-loaders rated to hold +/-4 °C of starting temperature for up to 4 hours — passive insulation, no power required.

Hot-hold

Heatwave® thermal pellets

Pre-heated pellet bases that slot under the patient plate and hold above 65 °C through tray-line, transport and bedside service.

Storage

StoreSafe® food rotation labels

Dissolvable, day-of-the-week food rotation labels — built so every prepped container in the kitchen carries an unambiguous use-by record.

South African Regulations

Food safety rules every healthcare kitchen has to meet.

The Cambro meal-distribution range is specified against the temperature-control and hygiene rules that govern South African foodservice — including catering operations inside hospitals and aged-care facilities.

Foodstuffs, Cosmetics and Disinfectants Act 54 of 1972 — R638 (2018)

The General Hygiene Requirements for Food Premises and the Transport of Food (Regulation R638, gazetted 22 June 2018) governs every food business in South Africa. Among other things it requires a valid Certificate of Acceptability per premises, separation of raw and ready-to-eat food, and documented temperature control from receipt through to service.

Temperature control — the danger zone

  • Hot-hold: potentially hazardous food must be held above +65 °C.
  • Cold-hold: at or below +5 °C.
  • Danger zone:+5 °C to +60 °C — food may sit here for no more than 4 hours cumulatively before it must be discarded.
  • Cool-down:from +60 °C to +21 °C within 2 hours, then from +21 °C to +5 °C within a further 4 hours.

HACCP & SANS 10330

Most provincial Departments of Health require healthcare-catering contractors to operate to a documented HACCP plan aligned with SANS 10330 (Requirements for a Hazard Analysis and Critical Control Point system). Cambro StoreSafe labels, calibrated thermometers and Camtherm/Camcarrier delivery temperatures support the CCP records auditors look for.

Need a healthcare meal-distribution spec for your facility?

Browse meal distribution rangeTalk to a healthcare specialist

Browse CAMBRO by category

All categories209Cambro187Storage & Handling169Dishwashing Accessories21Uncategorized21High Heat Inserts19Utilities & Smalls18Polycarbonate Inserts17Polycarbonate Containers16
17 products in Polycarbonate InsertsClear category filter
CAMWEAR POLYCARBONATE INSERT - 150MM - FULL - 19.5LT
CAMBROCAMWEAR POLYCARBONATE INSERT - 150MM - FULL - 19.5LT

Full Clear

SKU · INF4150-C

CAMWEAR POLYCARBONATE INSERT - 200MM
CAMBROCAMWEAR POLYCARBONATE INSERT - 200MM

One Half Clear

SKU · INH5150-C

CAMWEAR POLYCARBONATE INSERT - 200MM - FULL - 25.6LT
CAMBROCAMWEAR POLYCARBONATE INSERT - 200MM - FULL - 25.6LT

Full Clear

SKU · INF4200-C

CAMWEAR POLYCARBONATE INSERT - BLACK - 100MM - SIXTH - 1.5LT
CAMBROCAMWEAR POLYCARBONATE INSERT - BLACK - 100MM - SIXTH - 1.5LT

One Sixth Black

SKU · INS5150-C

CAMWEAR POLYCARBONATE INSERT - BLACK - 100MM - THIRD - 3.6LT
CAMBROCAMWEAR POLYCARBONATE INSERT - BLACK - 100MM - THIRD - 3.6LT

One Third Black

SKU · INT5101-C

CAMWEAR POLYCARBONATE INSERT - BLACK - 150MM - SIXTH - 2.2LT
CAMBROCAMWEAR POLYCARBONATE INSERT - BLACK - 150MM - SIXTH - 2.2LT

One Sixth Black

SKU · INS4100-C

CAMWEAR POLYCARBONATE INSERT - BLACK - 65MM - HALF - 3.9LT
CAMBROCAMWEAR POLYCARBONATE INSERT - BLACK - 65MM - HALF - 3.9LT

One Half Black

SKU · INH5065-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 100MM - HALF - 5.9LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 100MM - HALF - 5.9LT

One Half Clear

SKU · INH4100-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 100MM - NINTH - 1LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 100MM - NINTH - 1LT

One Ninth Clear

SKU · INN5100-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 100MM - SIXTH - 1.5LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 100MM - SIXTH - 1.5LT

One Sixth Clear

SKU · INS5100-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 100MM - THIRD - 3.6LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 100MM - THIRD - 3.6LT

One Third Clear

SKU · INT5100-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 150MM - HALF - 8.9LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 150MM - HALF - 8.9LT

One Half Clear

SKU · INH4150-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 150MM - NINTH - 1.4LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 150MM - NINTH - 1.4LT

One Ninth Clear

SKU · INN9150-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 150MM - SIXTH - 2.2LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 150MM - SIXTH - 2.2LT

One Sixth Clear

SKU · INS4150-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 150MM - THIRD - 5.3LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 150MM - THIRD - 5.3LT

One Third Clear

SKU · INT5063-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 65MM - HALF - 3.9LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 65MM - HALF - 3.9LT

One Half Clear

SKU · INH4065-C

CAMWEAR POLYCARBONATE INSERT - CLEAR - 65MM - THIRD - 2.4LT
CAMBROCAMWEAR POLYCARBONATE INSERT - CLEAR - 65MM - THIRD - 2.4LT

One Third Clear

SKU · INT4150-C